LMJJ-FA2505A-5M 25mm FA lens

Specifications

LMJJ-FA2505A-5M values from the Lensmind HS FA specification sheet (final client revision). No series estimates.

Part No.	LMJJ-FA2505A-5M
Sensor	2/3″
EFL	25 mm
F/#	F1.6–16
Mount	C-Mount
FOV D / H / V	24.02° / 18.75° / 14.35°
BFL	17.526 mm
Distortion	<0.12%
Focusing range	0.1 m ~ 1.5 m
Filter thread	M30.5×0.5

Part No.

LMJJ-FA2505A-5M

Sensor

2/3″

EFL

25 mm

F/#

F1.6–16

Mount

C-Mount

FOV D / H / V

24.02° / 18.75° / 14.35°

BFL

17.526 mm

Distortion

<0.12%

Focusing range

0.1 m ~ 1.5 m

Filter thread

M30.5×0.5

16 mm, 25 mm, or 35 mm?

Same C-mount, F1.6–16, and 2/3" image circle. Pick focal length from field of view and working distance — values from the Lensmind HS FA sheet.

Spec	LMJJ-FA1605A-5M	LMJJ-FA2505A-5M	LMJJ-FA3505A-5M
EFL	16 mm	25 mm	35 mm
F/#	F1.6–16	F1.6–16	F1.6–16
FOV D / H / V	37.65° / 30.07° / 23.35°	24.02° / 18.75° / 14.35°	17.3° / 13.7° / 10.2°
Distortion	<0.1%	<0.12%	<0.15%
Focusing range	0.1 m ~ 1.5 m	0.1 m ~ 1.5 m	0.15 m ~ ∞
Filter	M30.5×0.5	M30.5×0.5	M30.5×0.5
Choose when	Wider field on the same 2/3" sensor. Closer stations, larger objects.	Default AOI / guidance FOV. This page.	Tighter field, longer working distance, smaller targets.

Where LMJJ-FA2505A-5M is specified

A 25 mm F1.6 C-mount FA lens for 2/3″ cameras on lines that cannot tolerate edge deformation. Typical stations below.

AOI / automated optical inspection

Low distortion (<0.12%) keeps pass/fail geometry honest at the field edge, so the AOI threshold is not eaten by the lens before the part varies.

Robotic guidance and pick-and-place

Fixed 25 mm prescription and C-mount BFL 17.526 mm hold calibration between changeovers. Swap a catalog unit without re-tuning the cell.

Inline quality monitoring

2/3″ volume stations for presence, polarity, and cosmetic checks. F1.6–16 covers bright-field and stopped-down contrast on the same barrel.

2/3″ C-mount machine vision cameras

Matched to the sensor class that dominates factory automation. Send the camera or Sony IMX part number and we confirm image circle and CRA.

How to specify this lens

Send these four items and an engineer replies with datasheet, distortion/MTF records, and pricing within one business day.

Camera or sensor PN

Sony IMX or the camera model. We confirm 2/3" format, image circle, CRA, and C vs CS mount against FA2505A-5M.

Working distance and object size

Distance from the lens and the field you need to cover. If 25 mm is wide or tight, we shortlist 16 mm or 35 mm from the same series.

Sample qty and annual volume

Catalog FA sampling from 50 pcs standard MOQ. Annual quantity sets production slot and price break.

What you need back

Datasheet, MTF, mechanical drawing, or a custom F/# / mount. Name it in the message so the first reply is complete.

Built and tested in our own optics factory

Every Lensmind FA lens is machined, coated, cemented, and aligned in-house in Hangzhou. Core optical steps are not outsourced, so a drift found at final test can be traced the same day.

ISO 9001 process control on the production line

1 μm-class active alignment before the barrel is locked

Per-batch MTF, distortion, and BFL records with the shipment

See the manufacturing line →

Questions buyers ask about LMJJ-FA2505A-5M

What is the LMJJ-FA2505A-5M FA lens?

LMJJ-FA2505A-5M is a 25 mm F1.6–16 C-mount factory-automation lens for 2/3″ machine vision cameras. It is a catalog part in the Lensmind HS FA series, used on AOI, robotic guidance, and inline inspection stations that cannot tolerate edge deformation.

What cameras and sensors does it fit?

It is specified for 2/3″ sensors on C-mount. Back focal length is 17.526 mm. Send the camera or sensor part number — Sony IMX and similar — and we confirm image circle, CRA, and mount against this model or a nearby focal length.

What does distortion <0.12% mean on the line?

Geometric error at the field edge shows up as false rejects or offset picks. LMJJ-FA2505A-5M is held below 0.12% distortion so the image stays usable into the corners of a 2/3″ sensor, without relying on software warp as a crutch.

What FOV and focusing range should I plan for?

On a 2/3″ sensor the field of view is 24.02° diagonal / 18.75° horizontal / 14.35° vertical. Focusing range is 0.1 m ~ 1.5 m. Filter thread is M30.5×0.5 if you need a bandpass or polarizer in front of the lens.

Can you customize focal length, F/#, or mount?

Yes. 25 mm F1.6 C-mount is the catalog starting point. Custom focal length, aperture, and mount variants are quoted from your sensor drawing. Feasibility typically comes back with the first reply, within one business day.

Do you send a datasheet, MTF, and mechanical drawing?

Yes. Open the inquiry form with the model, sensor, and quantity. The reply includes the datasheet plus the distortion and MTF records for this part. Mechanical drawings go out at quotation stage.

What is the sampling MOQ?

Catalog FA lenses support sampling from a 50 pcs standard MOQ. Custom programs start from a drawing or a physical sample, then run prototype-to-mass-production. Repeat catalog orders follow the same ISO 9001 release path as the first batch.

Should I use 16 mm, 25 mm, or 35 mm?

All three are 2/3" C-mount F1.6–16. FA1605A-5M (16 mm) is wider — FOV 37.65° / 30.07° / 23.35°. FA2505A-5M (this page) is 24.02° / 18.75° / 14.35°. FA3505A-5M (35 mm) is 17.3° / 13.7° / 10.2° with focus from 0.15 m to infinity. Match FOV to working distance and object size, or send both and we shortlist.