131 articles published
LED flicker after a power supply swap is an electrical-to-exposure matching miss. Lock lighting electrical specs to the camera exposure plan before...
Read the note →
“Low distortion” without a distortion map is a claim without evidence. Require maps, measurement conditions, and accept limits on the PO before...
Read the note →
A conveyor redesign that changes working distance is a lens re-check trigger, not a same-lens assumption. Recalculate magnification, DOF, and resolution before...
Read the note →
An orderable-subcomponent pack is the maker-backed boundary list that states which caps, clamps, front windows, and similar parts can be purchased alone,...
Read the note →
A telecentricity bench proof pack is the acceptance file that turns a datasheet telecentric claim into measured magnification-versus-object-distance curves and written reject...
Read the note →
A short-working-distance large-FOV feasibility input pack is the maker-ready file that states part size, stand-off, pixel budget, and which image costs the...
Read the note →
A drawing-share pack is the minimum disclosure set and agreement that must exist before a lens maker receives device drawings that are...
Read the note →
An illumination pupil pack is the optical data set that tells a lighting designer where the lens aperture stop and entrance pupil...
Read the note →
A smear decision pack is the maker-backed comparison that tells a web-inspection team whether to rebuild around a line-scan lens or to...
Read the note →
